import FreeCAD as App import Part # ===================================================== # COMPILER # ===================================================== IN = 25.4 LUMBER_SIZES = { "2x4": 3.5, "2x6": 5.5, "2x8": 7.25, "2x10": 9.25, "2x12": 11.25 } def inch(value): return value * IN def add_box(doc, name, x, y, z, sx, sy, sz): obj = doc.addObject("Part::Box", name) obj.Length = sx obj.Width = sy obj.Height = sz obj.Placement.Base = App.Vector(x, y, z) return obj def add_prism(doc, name, pts): verts = [App.Vector(*p) for p in pts] faces_idx = [ [0, 1, 2, 3], [4, 7, 6, 5], [0, 4, 5, 1], [1, 5, 6, 2], [2, 6, 7, 3], [3, 7, 4, 0], ] faces = [] for idxs in faces_idx: poly = Part.makePolygon([verts[i] for i in idxs] + [verts[idxs[0]]]) faces.append(Part.Face(poly)) shell = Part.makeShell(faces) solid = Part.makeSolid(shell) obj = doc.addObject("Part::Feature", name) obj.Shape = solid return obj def add_sloped_member_y(doc, name, x, y, z_bottom, sx, sy, top_exterior_z, top_interior_z): """ Member with flat bottom and top sloping along local Y. X = module width Y = wall depth Z = height exterior side = local Y = 0 interior side = local Y = wall depth """ pts = [ (x, y, z_bottom), (x+sx, y, z_bottom), (x+sx, y+sy, z_bottom), (x, y+sy, z_bottom), (x, y, top_exterior_z), (x+sx, y, top_exterior_z), (x+sx, y+sy, top_interior_z), (x, y+sy, top_interior_z), ] return add_prism(doc, name, pts) def add_sloped_plate_y(doc, name, x, y, sx, sy, bottom_exterior_z, bottom_interior_z, thickness): """ Constant-thickness sloped plate. Both bottom and top faces follow the rake slope across wall depth. """ pts = [ (x, y, bottom_exterior_z), (x+sx, y, bottom_exterior_z), (x+sx, y+sy, bottom_interior_z), (x, y+sy, bottom_interior_z), (x, y, bottom_exterior_z + thickness), (x+sx, y, bottom_exterior_z + thickness), (x+sx, y+sy, bottom_interior_z + thickness), (x, y+sy, bottom_interior_z + thickness), ] return add_prism(doc, name, pts) def compile(schema, doc): ox, oy, oz = schema["origin"] ox = inch(ox) oy = inch(oy) oz = inch(oz) module_width_in = schema["module_width_in"] high_side_height_in = schema["high_side_height_in"] slope_drop_per_foot_in = schema["slope_drop_per_foot_in"] high_side = schema["high_side"] lumber = schema["lumber"] if lumber not in LUMBER_SIZES: raise ValueError("Unsupported lumber size: " + lumber) wall_depth_in = LUMBER_SIZES[lumber] t_in = 1.5 stud_spacing_in = schema["stud_spacing_in"] osb_thickness_in = schema["osb_thickness_in"] total_drop_in = slope_drop_per_foot_in * (wall_depth_in / 12.0) if high_side == "interior": exterior_height_in = high_side_height_in - total_drop_in interior_height_in = high_side_height_in elif high_side == "exterior": exterior_height_in = high_side_height_in interior_height_in = high_side_height_in - total_drop_in else: raise ValueError('high_side must be "exterior" or "interior"') if min(exterior_height_in, interior_height_in) <= 2 * t_in: raise ValueError("Module is too short for bottom plate, studs, and top plate.") def height_at_y(y_in): return exterior_height_in + (interior_height_in - exterior_height_in) * (y_in / wall_depth_in) # Coordinate convention: # X = module width # Y = wall depth # Z = height # Exterior / OSB side = negative Y # Interior side = positive Y module_width = inch(module_width_in) wall_depth = inch(wall_depth_in) t = inch(t_in) osb = inch(osb_thickness_in) # ------------------------------------------------- # Bottom plate # ------------------------------------------------- add_box( doc, "Bottom_Plate", ox, oy, oz, module_width, wall_depth, t ) # ------------------------------------------------- # Standard studs # ------------------------------------------------- stud_positions = [ (0, "Left_End_Stud"), (stud_spacing_in - t_in / 2, "Interior_Stud_1_24oc"), (module_width_in - t_in, "Right_End_Stud"), ] for x_in, label in stud_positions: add_sloped_member_y( doc, label, ox + inch(x_in), oy, oz + t, t, wall_depth, oz + inch(exterior_height_in - t_in), oz + inch(interior_height_in - t_in) ) # ------------------------------------------------- # U-corner reinforcement # Same geometry as standard wall module, but rake-cut across depth. # ------------------------------------------------- def add_left_corner_reinforcement(): u_depth_in = wall_depth_in u_t_in = t_in add_sloped_member_y( doc, "Left_Corner_U_Left_Leg", ox + inch(0), oy + inch(0), oz + t, inch(u_t_in), inch(u_depth_in), oz + inch(exterior_height_in - t_in), oz + inch(interior_height_in - t_in) ) add_sloped_member_y( doc, "Left_Corner_U_Back", ox + inch(u_t_in), oy + inch(u_depth_in - u_t_in), oz + t, inch(u_depth_in), inch(u_t_in), oz + inch(height_at_y(u_depth_in - u_t_in) - t_in), oz + inch(height_at_y(u_depth_in) - t_in) ) add_sloped_member_y( doc, "Left_Corner_U_Right_Leg", ox + inch(u_depth_in - u_t_in + 2 * u_t_in), oy + inch(0), oz + t, inch(u_t_in), inch(u_depth_in), oz + inch(exterior_height_in - t_in), oz + inch(interior_height_in - t_in) ) def add_right_corner_reinforcement(): u_depth_in = wall_depth_in u_t_in = t_in add_sloped_member_y( doc, "Right_Corner_U_Right_Leg", ox + inch(module_width_in - u_t_in), oy + inch(0), oz + t, inch(u_t_in), inch(u_depth_in), oz + inch(exterior_height_in - t_in), oz + inch(interior_height_in - t_in) ) add_sloped_member_y( doc, "Right_Corner_U_Back", ox + inch(module_width_in - u_t_in - u_depth_in), oy + inch(u_depth_in - u_t_in), oz + t, inch(u_depth_in), inch(u_t_in), oz + inch(height_at_y(u_depth_in - u_t_in) - t_in), oz + inch(height_at_y(u_depth_in) - t_in) ) add_sloped_member_y( doc, "Right_Corner_U_Left_Leg", ox + inch(module_width_in - u_depth_in - 2 * u_t_in), oy + inch(0), oz + t, inch(u_t_in), inch(u_depth_in), oz + inch(exterior_height_in - t_in), oz + inch(interior_height_in - t_in) ) if schema.get("left_corner_reinforcement", False): add_left_corner_reinforcement() if schema.get("right_corner_reinforcement", False): add_right_corner_reinforcement() # ------------------------------------------------- # Sloped top plate # ------------------------------------------------- add_sloped_plate_y( doc, "Sloped_Top_Plate", ox, oy, module_width, wall_depth, oz + inch(exterior_height_in - t_in), oz + inch(interior_height_in - t_in), t ) # ------------------------------------------------- # Exterior OSB # ------------------------------------------------- if schema.get("include_osb", True): add_box( doc, "Exterior_OSB", ox, oy - osb, oz, module_width, osb, inch(exterior_height_in) ) doc.recompute() print("Depth rake wall module complete.") print("Module width:", module_width_in, "in") print("High-side height:", high_side_height_in, "in") print("Slope drop:", slope_drop_per_foot_in, "in/ft") print("High side:", high_side) print("Exterior height:", exterior_height_in, "in") print("Interior height:", interior_height_in, "in") print("Lumber:", lumber) return list(doc.Objects)