cabin_walls_floor

Cabin floor and walls assembly

Layer: assembly
Status: active
Owner: Catarina
Version: 0.1.0

code pass output pass

3D View

Envelope: 156.0 x 145.0 x 104.75 in

Mesh available: download STL.

Parameters

Download exported JSON · schema.py · compiler.py

General

Parameter	Value
`schema_name`	Cabin_Floor_Walls_Assembly
`units`	in
`document_name`	Cabin_155x144_Floor_Walls_Only
`name`	Cabin_155x144_Floor_Walls_Only
`walls`	{"modules": [{"left_corner_reinforcement": false, "right_corner_reinforcement": true, "type": "standard"}, {"left_corner_reinforcement": false, "right_corner_reinforcement": false, "type": "standard"}, {"left_corner_reinforcement": true, "right_corner_reinforcement": false, "type": "standard"}], "name": "Left_Wall", "side": "left"}, {"modules": [{"left_corner_reinforcement": true, "right_corner_reinforcement": false, "type": "standard"}, {"left_corner_reinforcement": false, "right_corner_reinforcement": false, "type": "standard"}, {"left_corner_reinforcement": false, "right_corner_reinforcement": true, "type": "standard"}], "name": "Right_Wall", "side": "right"}, {"modules": [{"type": "window", "window_left_in": null, "window_rough_height_in": 60, "window_rough_width_in": 30, "window_sill_height_in": 24}, {"door_left_in": null, "door_rough_height_in": 82, "door_rough_width_in": 38.25, "type": "door"}, {"type": "window", "window_left_in": null, "window_rough_height_in": 60, "window_rough_width_in": 30, "window_sill_height_in": 24}], "name": "Front_Wall", "side": "front", "start_offset_in": 5.5}, {"modules": [{"left_corner_reinforcement": false, "right_corner_reinforcement": false, "type": "standard"}, {"door_left_in": null, "door_rough_height_in": 82, "door_rough_width_in": 38.25, "type": "door"}, {"left_corner_reinforcement": false, "right_corner_reinforcement": false, "type": "standard"}], "name": "Back_Wall", "side": "back", "start_offset_in": 5.5}

Floor

Parameter	Value
`width_in`	155
`depth_in`	144
`framing_lumber`	2x8
`joist_spacing_in`	24
`double_rim_joists`	true
`sheet_width_in`	48
`sheet_length_in`	96
`top_sheathing_material`	OSB
`top_osb_thickness_in`	0.75
`bottom_sheathing_material`	Pressure_Treated_Plywood
`bottom_osb_thickness_in`	0.75

Common Wall

Parameter	Value
`module_width_in`	48
`stud_height_in`	92.625
`stud_spacing_in`	24
`lumber`	2x6
`osb_thickness_in`	0.5
`osb_sheet_width_in`	48
`osb_sheet_height_in`	96
`include_osb`	true

Fabrication Drawing

Generated SVG

BOM

Download CSV

count	description	cut length in	material class	total volume in3
48	2x6	92.625	lumber	36679.5
12	0.5 in sheet	96	sheet	22711.5
6	0.75 in sheet	96	sheet	20736
10	2x8	138	lumber	15007.5
24	2x6	48	lumber	9504
4	0.75 in sheet	59	sheet	8496
4	2x8	155	lumber	6742.5
2	0.75 in sheet	48	sheet	3456
4	2x6	84	lumber	2772
4	2x6	80.5	lumber	2656.5
4	2x8	45	lumber	1957.5
6	2x6	33	lumber	1633.5
2	0.75 in sheet	48	sheet	792
2	2x6	45	lumber	742.5
2	2x6	30	lumber	495
12	1.5 x 4.5 x 5.5		other	445.5
2	2x6	22.5	lumber	371.25
12	1.5 x 1.875 x 5.5		other	185.625
2	1.5 x 3.375 x 5.5		other	55.687
2	1.5 x 1.625 x 5.5		other	26.813

Validation

Code

schema_data_only
schema_required_fields
unit_suffix_discipline
param_admissibilityno rules
compiler_contract
meta_complete
interface_consistentno interface

Output

compiles
completeness
overlap
fit

Provenance

author: Catarina
drive_file_id: 1T-KZ7tfeXxm8RcStqN4M0vSjetUI7tLe
original_filename: Schema - cabin assembly - walls + floor.py
source: https://wiki.opensourceecology.org/wiki/Catarina_Log

Interface

Known Issues

The corner reinforcement U-channel is modeled on top of the standard stud layout, so one U leg fully coincides with the end stud (about 764 in3 of duplicated volume per reinforced corner). Kept as authored; affects volume-derived counts, not placement. Flagged by the output validator, allowed by expect.yaml as a documented author decision pending owner review.

Contribute

Catarina is the listed reviewer for this entry.

Entry source · Contributing guide